The Increase in the Probability of Failure-Free Operation of the IR-Devices Homing and Tracking by the of Electron Beam Processing of Optical Fairings on the Areas

Authors I.V. Yatsenko1 , V.S. Antonyuk2 , V.I. Gordienko3, O.V. Kiritchenko4, V.A. Vaschenko1
Affiliations

1Cherkasy State Technological University, 460, Shevchenko Blvd., 18030 Cherkasy, Ukraine

2National Technical University of Ukraine "KPI", 37, Pobeda Prosp., 03056 Kiev, Ukraine

3Enterprise Scientific-production Complex "Photopribor", 85, B. Vishnevetsky Str., 18000 Cherkasy, Ukraine

4Cherkasy Institute of fire safety named Heroes of Chernobyl National University of civil protection of Ukraine, 8, Onoprienko Str., 18034, Cherkasy, Ukraine

Е-mail [email protected]
Issue Volume 10, Year 2018, Number 4
Dates Received 11 February 2018; published online 25 August 2018
Citation I.V. Yatsenko, V.S. Antonyuk, V.I. Gordienko, et al., J. Nano- Electron. Phys. 10 No 4, 04028 (2018)
DOI http://dx.doi.org/10.21272/jnep.10(4).04028
PACS Number(s) 42.79. Bh
Keywords External thermo-influences, Optical fairings, The electron beam.
Annotation

The results of theoretical researches of process of the thermal effects of supersonic gas flow on the hemispherical fairings of optical ceramics IR-devices homing and tracking, determining the location on the surface plots the maximum external thermo-influences, where the destruction of the fairings, which leads to failure of the device. The results of experimental researches of properties of surface layers of these areas by the finish of electron beam processing, which leads to increased durability of the fairings to the external thermal and mechanical stresses and decrease in the amount of damage and improve efficiency of the devices during their operation.

List of References

English version of article