Authors | J. Gulomov , R. Aliev , J. Kakhkhorov, B. Tursunov |
Affiliations |
Andijan State University, 129, Universitet Str., 170100 Andijan, Uzbekistan |
Е-mail | jasurbekgulomov@yahoo.com |
Issue | Volume 15, Year 2023, Number 2 |
Dates | Received 09 February 2023; revised manuscript received 14 April 2023; published online 27 April 2023 |
Citation | J. Gulomov, R. Aliev, J. Kakhkhorov, B. Tursunov, J. Nano- Electron. Phys. 15 No 2, 02019 (2023) |
DOI | https://doi.org/10.21272/jnep.15(2).02019 |
PACS Number(s) | 85.60.Bt, 78.20.Bh, 84.60.Jt |
Keywords | Solar cell (51) , Simulation (35) , Open circuit voltage (2) , Photoelectric parameters, Passivation.Fig2AM1.5G spectrum. |
Annotation |
The efficiency of solar cells depends on the quality of passivation of surface. The quality of passivation is analyzed as a function of the dependence of the open circuit voltage on the light intensity. Therefore, in this article, the dependence of the photoelectric parameters of the silicon-based solar cell on the light intensity was studied. According to the obtained results, it was found that the variation of the short-circuit current through light intensity is equal to 25.6 mA/suns·cm2. The agreement of the results obtained in research and modeling with the results of experiments proves the validity and correctness of the model. In this paper, the Sentaurus TCAD model of a silicon-based solar cell is experimentally verified. So, the dependence of the open circuit voltage of the silicon-based solar cell on the light intensity was studied through modeling and experiment. The functional dependence of the open circuit voltage obtained in the modeling satisfied the experiment. Therefore, the model of the solar cell created in Sentaurus TCAD is suitable for research. So, we can use model created in Sentaurus TCAD in our further researches. In addition, the fill factor of solar cell increased with increasing intensity. This proves that the resistive properties of the solar cell are improving. |
List of References |