Design Optimization of Deflection Caused After Release of Multilayer Structural Membrane of Symmetric Toggle Switch

Authors K. Maninder1, Akshdeep Sharma1, Deepak Bansal1, Dinesh Kumar2, S. Singh3, K.J. Rangra1
Affiliations

1 Central Electronics Engineering Research Institute (CEERI), Council of Scientific and Industrial Research, Pilani, 333031, Rajasthan, India

2 Department of Electronic Sciences, Kurukshetra University, 136119, Kurukshetra, Haryana, India

3 ATDD, Space Application Centre, ISRO, Jodhpur Tekra, Ambawadi Vistar, 380015, Ahmedabad, Gujarat, India

Е-mail kjrangra@gmail.com
Issue Volume 3, Year 2011, Number 1, Part 4
Dates Received 04 February 2011, published online 17 October 2011
Citation K. Maninder, Akshdeep Sharma, Deepak Bansal, Dinesh Kumar, S. Singh, K.J. Rangra, J. Nano- Electron. Phys. 3 No1, 787 (2011)
DOI
PACS Number(s) 85.85.+j
Keywords Multilayer (11) , RF MEMS switch, Deflection, Fabrication (3) , Isolation (2) , Insertion loss (2) .
Annotation
This paper presents the optimization in deflection caused by the inbuilt stress generated in mechanical or movable membrane of Symmetric Toggle RF MEMS Switch (STS). The movable membrane of STS was initially fabricated with two different materials, i.e. Chrome and Gold. The simulated deflection at 70 °C was 11.9 µm, and experimental deflection was 11-12 µm. We present a study of inbuilt deflection reduction in multimetal movable layers without change in actuation voltage of the switch. The design study was initially carried out on cantilevers and then on structural membrane of STS. STS with proposed multilayer of Cr-Au-Au-Ti-Au has a simulated deflection of 0.56 µm at 70 °C.

List of References