Implementation of Three Phase Vienna Rectifier for DC Load Applications Using Multicarrier Pulse Width Modulation
| Authors | Palanisamy R1, Savitha U2, Selciya Selvan3, Usha S1 |
| Affiliations |
1Department of Electrical and Electronics Engineering, College of Engineering and Technology, SRM Institute of Science and Technology, Kattankulathur, 603203 India 2Department of Electronics and Communication Engineering, Karpaga Vinayaga College of Engineering and Technology, Chennai, India 3Department of Electronics and Communication Engineering, Chennai Institute of Technology, Chennai, India |
| Е-mail | ushas@srmist.edu.in |
| Issue | Volume 17, Year 2025, Number 5 |
| Dates | Received 28 August 2025; revised manuscript received 15 October 2025; published online 30 October 2025 |
| Citation | Palanisamy R, Savitha U, Selciya Selvan, et al., J. Nano- Electron. Phys. 17 No 5, 05024 (2025) |
| DOI | https://doi.org/10.21272/jnep.17(5).05024 |
| PACS Number(s) | 84.30.Jc |
| Keywords | Three phase Vienna rectifier, Multicarrier Pulse Width Modulation, Total harmonic distortion, Power factor correction. |
| Annotation |
The three-phase Vienna rectifier is a high-performance power conversion topology widely used in industrial and commercial applications due to its superior efficiency, power factor correction (PFC) capabilities, and reduced harmonic distortion. This paper presents the implementation of a three-phase Vienna rectifier tailored for DC load applications, utilizing Multicarrier Pulse Width Modulation (MCPWM) to achieve enhanced control and performance. The proposed system focuses on optimizing the operation of the Vienna rectifier through the strategic deployment of MCPWM, enabling precise switching control for effective power factor correction and reduced Total Harmonic Distortion (THD) in the input current. The design methodology, circuit configuration, and modulation strategy are discussed in detail, with a focus on achieving stable output DC voltage, low switching losses, and improved overall system efficiency. Simulation results validate the effectiveness of the proposed MCPWM-based Vienna rectifier in handling variable DC loads while maintaining high efficiency and power quality. The implementation offers a scalable and robust solution for applications in renewable energy systems, electric vehicle chargers, and industrial power supplies, providing a pathway for further exploration and development in advanced rectifier technologies. |
|
List of References |
Other articles from this number
1) Influence of NaCl Concentration on the Size of CdS Nanoparticles in the Presence of PVA [05001-1-05001-6]2) Free Vibration Analysis of a Functionally Graded Nanoplate (Al2O3/Al): Parametrically Analyzed [05002-1-05002-5]
3) The Electronic Structure of the Cr:ZnS Crystal Modified by Mono- and Bi-Vacancy Defects [05003-1-05003-6]
4) Electrophysical Properties of [Ni80Fe20/SiOx)]n Discontinuous Multilayers [05004-1-05004-5]
5) Study of Antifriction Electrospark Coatings with MoS2 for Face Seal Elements of Nuclear Power Plants [05005-1-05005-7]
6) Effects of Nonlocality and Porosity on Frequency Vibration Characteristics of SUS304/Si3N4 Functionally Graded Nanoplates [05006-1-05006-5]
7) Multiband Microstrip Patch Antenna Using Artificial Magnetic Conductor with Enhanced Bandwidth and Gain for Wireless Applications [05007-1-05007-5]
8) An Analytical Method for Determination of Threshold Voltage of Surrounded Channel Junctionless Field Effect Transistor [05008-1-05008-4]
9) X-Ray and Raman Spectroscopy of (Si2)1 – x(BP)x Binary Compounds in Silicon [05009-1-05009-5]
10) The Effect of Nanofluid Concentration and Flow Profile on Heat Transfer [05010-1-05010-6]
11) Comparative Analysis of the Properties ofManganese Silicide [05011-1-05011-4]
12) Optical and Structural Properties of ZnSe Nanoparticles [05012-1-05012-4]
13) Optical and Magnetic Properties of Silicon with Binary GexSi1 – x Nanocompounds [05013-1-05013-5]
14) Performance Investigation of LLC Resonant Converter for Electric Vehicle Application [05014-1-05014-6]
15) AI-Based Enhanced Production of Vanadium Dioxide Thermochromic Films [05015-1-05015-6]
16) Controlled Deposition of Zn Thin Films by Spin Coating: Influence of Spin Speed on Film Microstructure and Transparency [05016-1-05016-8]
17) Determination of Contact Field Parameters of a Solar Cell with Multiple Nanoheterojunctions
18) p-i-n Photodiode with a p+ Guard Ring [05018-1-05018-6]
19) Effect of Ultrasonic Nanocrystal Surface Modification on Microhardness and Tensile Properties of Laser Powder Bed Fusion 316L Steel [05019-1-05019-10]
20) Microelectronic Stimulator of the Optic Nerves [05020-1-05020-5]
21) Spin Exchange d-f Interaction in Impedance Spectrum [05021-1-05021-7]
22) Plasmonic Phenomena in Metallic Nanocap [05022-1-05022-10]
23) The Impact of Electromagnetic and Optical Radiation on Physical and Biological Systems [05023-1-05023-4]
24) Physical and Applied Aspects of Nanomaterials and Thin Films in Emerging Communication Technologies [05025-1-05025-5]
25) Performance Analysis of Boost Converter Using Model Predictive Controller [05026-1-05026-5]
26) Cooling Performance of Ternary Nanofluids under Magnetic Field Influence [05027-1-05027-5]
27) Finite-time Stabilization of Discrete-time Linear Systems Subject to Time-varying Delay Using a Novel Summation Inequality [05028-1-05028-6]
28) Cloud String Cosmological Model of Bianchi Type-III with Bulk Viscosity in General Relativity [05029-1-05029-3]
29) Efficient Removal of Heavy Metals and Organic Dyes from Aqueous Solutions Using Manganese-Associated Graphene Oxide: A Batch Adsorption Study [05030-1-05030-5]
30) Self-Isolated Dual-Band MIMO Antenna for Improved Diversity in ISM Band and Wireless Applications [05031-1-05031-5]
31) Optimizing Flow Shop Scheduling for Energy Efficiency and Sustainability in Semiconductor Manufacturing: A Comparative Study of NEH and PIG_NEH Algorithms [05032-1-05032-5]
32) Multiresonant Artificial Magnetic Conductor Impacted Monopole Antenna for WBAN Applications [05033-1-05033-5]
33) Segmentation of Skin Lesion Using Double U-Net Framework for Enhanced Feature Extraction [05034-1-05034-5]
34) Wearable Microstrip Patch Antenna with Notched Corners for Enhanced Multi-Band Performance [05035-1-05035-5]
35) AI-Driven Machine Learning Model for Stress Classification in Thin Film Materials [05036-1-05036-6]
36) Leveraging Artificial Intelligence to Predict Electronic Structures in Nanoparticles [05037-1-05037-6]
37) Development of Novel Optimization Technique for Surface Duct Estimation on Thin Films [05038-1-05038-5]
38) Experimental Investigation for Exploring the Effect of Ca2+, Dy3+ Doping on the Structural and Optical Properties of ZnO NPs [05039-1-05039-6]
