Electrical Properties and Magnetic Field Dependent I-V Characteristics of Nanocrystalline Cobalt Doped Nickel Ferrite
| Authors | P. Ghosh, P. Mitra |
| Affiliations |
Department of Physics, The University of Burdwan, West Bengal, India |
| Е-mail | mitrapartha1@rediffmail.com |
| Issue | Volume 13, Year 2021, Number 2 |
| Dates | Received 11 January 2021; revised manuscript received 25 March 2021; published online 09 April 2021 |
| Citation | P. Ghosh, P. Mitra, J. Nano- Electron. Phys. 13 No 2, 02013 (2021) |
| DOI | https://doi.org/10.21272/jnep.13(2).02013 |
| PACS Number(s) | 72.25. – b, 78.70.Ck |
| Keywords | Magnetoresistance (6) , XRD (95) , Rietveld fitting. |
| Annotation |
The influences of cobalt doping in nickel ferrite on electrical conductivity, dielectric properties (measured over a wide frequency range of 42 Hz to 5 MHz) and magnetic field (up to 15 kOe) dependent I-V characteristics are measured. Information about magneto resistance is very much necessary for magnetic property dependent electrical application of chemical routed CoxNi1 – xFe2O4. Material was prepared by sol gel self combustion technique. Characterization of synthesized powders were made using X-ray diffraction (XRD) with Rietveld fitting. |
|
List of References |
Other articles from this number
1) Band Gap Enhancement and Temperature Dependent PL in Sol-gel Synthesized Ce Doped ZnO Nanoparticles [02001-1-02001-4]2) Improvement in Properties of Mn-Zn Ferrite Nanoparticles by Rare Earth Doping [02002-1-02002-4]
3) Morphological and Electrical Characterization of SiNWs Synthesized by Electroless Metal Assisted Chemical Etching Method [02003-1-02003-4]
4) Optimization of FDM Printing Parameters for Surface Quality Improvement of Carbon Based Nylon (PA-CF) Composite Material Fabricated Parts Using Evolutionary Algorithm [02004-1-02004-5]
5) Integration of Finite Element Analysis, 3D Printing and Biopolymers to Enhance Research in Orthopaedics [02005-1-02005-4]
6) Application of Nano Sized Materials for Mitigating the Corrosion in Concrete: A Review [02006-1-02006-6]
7) Extracellular Synthesis of Zinc Oxide Nanoparticles Using Thermo-Halotolerant Aeribacillus pallidus strain SJP 27: Characterization and Antibacterial Potential [02007-1-02007-5]
8) Band Gap Reduction and Petal-like Nanostructure Formation in Heavily Ce-doped ZnO Nanopowders [02008-1-02008-5]
9) Python – a Tool for Percolation Analysis in Triangular Lattice [02009-1-02009-4]
10) Effect of Stir Casting Process Parameters on Mechanical Properties of Aluminium Matrix Composites: Experimental Investigation and Predictive Modelling [02010-1-02010-4]
11) Enhancement in Visible Emission by the Doping of Ce in ZnO Thin Films [02011-1-02011-3]
12) Bonding Analysis of [Au (3.16 nm)/Co (1.5 nm)]x35/Si (100) Multilayer Thin Film [02012-1-02012-4]
13) Synthesis and Characterization of Ecofriendly and Biodegradable Soy Protein Isolate Film [02014-1-02014-3]
14) Visual Naked Eye Colorimetric Determination of Phorate Pesticide Using Nanotechnology [02015-1-02015-4]
15) Nanoparticle Self-assembly at Liquid-liquid Interface [02016-1-02016-4]
16) Annealing Induced Red Shift in the Absorption Edge of TiO2 Films Prepared by Sol-gel Technique [02017-1-02017-3]
17) Design and Comparative Analysis of Compact Bioinspired Leaf-shaped Antenna Using Different Substrate Material for UWB and X-band Applications [02018-1-02018-5]
18) Designing of Triple Band Octagonal Ring Antenna for Flexible and Wearable Application [02019-1-02019-6]
19) 3D FDM Printable Polymer Composites and Polymer Nanocomposites: State of the Art [02020-1-02020-4]
20) Influence of Fine Supplementary Cementitious Materials on Compressive Strength of Concrete – a State of Art Review [02021-1-02021-4]
21) Simulation of Localized Surface Plasmon Resonance of Silver Nanoparticles with Graphene Coating Utilizing Maxwell-Garnett Theory [02022-1-02022-4]
22) The Raman Diagnostics of Carbon Films Obtained by Electron-beam Deposition on Cu, Al and Ni Substrates [02023-1-02023-5]
23) Spectral Parameters of an Exciton in Double Semiconductor Quantum Rings in an Electric Field [02024-1-02024-6]
24) Computer Simulation of Adsorption of Fullerene on Graphene [02025-1-02025-5]
25) Investigation of High-K Gate Dielectrics and Chirality on the Performance of Nanoscale CNTFET [02026-1-02026-8]
26) Study of the Effect of Selenium Doping on the Geometries and Electronic Characteristics of Germanium Clusters (SeGen, n = 1-20) Using DFT Calculations [02027-1-02027-5]
27) On one Approach to Control the Dynamic Properties of a Cylindrical Piezoceramic Acoustoelectronic Device with Single-frequency Resonant Excitation [02028-1-02028-5]
28) Performance Assessment of a New Gaussian-doped Junctionless ISFET: A Numerical Study [02029-1-02029-5]
29) Surface Modification of Grey Cast Iron by Pulsed-plasma Deposition and Subsequent Laser Beam Melting [02030-1-02030-7]
30) Effect of Confined Phonons on Temperature Renormalization of Spectral Characteristics of Quantum Cascade Detector Operating in Far Infrared Range [02031-1-02031-5]
31) A Small Ultra-wideband Circular Patch Antenna with Band-notched Characteristic [02032-1-02032-6]
32) Next Generation Material for Denture Teeth and Denture Base Material: Limpet Teeth (LT) as an Alternative Reinforcement in Polymethylmethacrylate (PMMA) [02033-1-02033-6]
33) Stages of Cr, Zn, Cu, Si, Ag, and Al Nucleation under Quasi-equilibrium Condensates of Ion-sputtered Atoms [02034-1-02034-6]
34) Gain Enhancement of Applied Micro Patch Antenna in Telemedicine Applications by Changing the Calculation of the Geometry [02035-1-02035-5]
35) Wettability of the Cotton and Polyester Fabrics Coated by Nanostructured Indium-doped Zinc Oxide Layers [02036-1-02036-11]
36) Calibration of X-ray Diffraction Measurements for Depth-selective Structural Analysis of Two-layer Samples [02037-1-02037-6]
37) Crystal Structure, Raman Spectra and Electrical Conductivity of LiNb1 – xTaxO3 Nanopowders Obtained with High-energy Ball Milling [02038-1-02038-6]
38) Technique of Mathematical Synthesis of Waveguide Iris Polarizers [0-0]
