CMOS Cascode Low Noise Amplifier (CCLNA) Design for Nanosensor Applications
| Authors | K. Suganthi1, S. Malarvizhi1, Ritam Dutta2 |
| Affiliations |
1Department of ECE, SRMIST, Chennai – 603203 Tamil Nadu, India 2CISR – ITER, Siksha ‘O’ Anusandhan University, Bhubaneswar – 751030 Odisha, India |
| Е-mail | ritamdutta1986@gmail.com |
| Issue | Volume 14, Year 2022, Number 3 |
| Dates | Received 15 February 2022; revised manuscript received 24 June 2022; published online 30 July 2022 |
| Citation | K. Suganthi, S. Malarvizhi, Ritam Dutta, J. Nano- Electron. Phys. 14 No 3, 03020 (2022) |
| DOI | https://doi.org/10.21272/jnep.14(3).03020 |
| PACS Number(s) | 84.40.Lj |
| Keywords | CCLNA, VSWR (3) , RADAR (2) , Conversion gain, CMOS design, Nanosensing, Nanomaterials (4) . |
| Annotation |
A design of Cascode Low Noise Amplifier (CCLNA) circuit is proposed using standard 0.18 µm millimeter wave (mmW) CMOS technology. The proposed CMOS CCLNA circuit has achieved a maximum conversion gain of 17.4 dB, NF of dB and a power of 22.3 mW at mmW Ka band. The input and output reflection coefficients are well matched with less than – 10 dB at the Ka band frequency with good Voltage Standing Wave Ratio (VSWR). The reverse transmission coefficient S12 is less than – 12 dB, indicating that the LNA has improved isolation between input and output, the stability factor is greater than one for the amplifier realization. The SoC-based CCLNA design for circuit level examination with analytical equations also proved that the simulation outcomes were prone to the design suitable for nanoelectronic applications for an output power of 2 dBm, transition frequency (fT) of 64 GHz and maximum operation frequency (fmax) of 96 GHz, which significantly shows the efficiency of the proposed method suitable for nanosensor applications. The justification of Radio Detection and Ranging (RADAR) front end simulation performance validates that the receiver designed with proposed LNA is suitable for the receiver design at high mmW frequencies. |
|
List of References |
Other articles from this number
1) Performance Study of Lead-Free Mixed Halide Cs2TiI6 – xBrx (where x = 1 to 5) Based Perovskite Solar Cell [03001-1-03001-5]2) Surface Water Quality of Selected Tributaries Flowing Through Two Districts, Ho Chi Minh City, Vietnam [03002-1-03002-5]
3) Bypass Diodes to Improve Solar Panel Efficiency for Certain Module [03003-1-03003-4]
4) Performance of Nata de Bamboo and Nata de Chayote Membranes as Zinc-Carbon Battery Separators [03004-1-03004-5]
5) Transition Metal Oxide Nanoparticles for Biofuel Production [03005-1-03005-4]
6) Low Noise Amplifier Design with Current Reuse Architecture and Pre-distortion Technique for Nanoelectronic Sensors Operating at 2.4 GHz [03006-1-03006-5]
7) Investigation of Radio Channel Characterization in Terahertz Range [03007-1-03007-5]
8) Quantitative Relation betweenthe Hamaker Constant and the Water Contact Angle with sp2/sp3 Ratio and Hydrogen Content in a Hydrogenated Diamond-Like Carbon Thin Film [03008-1-03008-5]
9) Single-Walled Carbon Nanotubes (SWCNTs), Ketjen Black (KB), and Gold Nanoparticles (AuNPs) Modified Glassy Carbon Electrode for Highly Selective Dopamine Sensing [03009-1-03009-5]
10) Electrochemical Response of Ascorbic Acid Using Screen-Printed Carbon Electrode [03010-1-03010-4]
11) Electronic Control Unit Based Stolen Vehicle Tracking System [03011-1-03011-5]
12) The Hole Transport Layer Material Optimization for an Efficient Lead-Free Double Perovskite Cs2AgBiBr6 Based Solar Cell by Numerical Simulation [03012-1-03012-4]
13) Analysis and Design of an Ultra-Wideband Non-coherent Transceiver for UWB Pulse Radio Communications in the Terahertz Band [03013-1-03013-5]
14) Computational Modelling of Surface Modified Carbon Nanotube for Low Temperature Fuel Cell [03014-1-03014-4]
15) Numerical Analysis of Performance of Various ETL Materials for Cesium Titanium (IV) Single Halide Based PSCs [03015-1-03015-5]
16) Study of Distributed Generations in Voltage Sag Mitigation Using Unbalanced Load Flow [03016-1-03016-5]
17) Contribution of Nanomaterials to the Development of Solar Cell Technology: A Review [03017-1-03017-5]
18) Low-Cost Sensor Node for Crack Monitoring of Out Pipes Using Non-Destructive Testing for Process Industries [03018-1-03018-5]
19) Design and Analysis of Junctionless VTFET Device for Sensing Applications [03019-1-03019-5]
20) Selective Electrochemical Sensor Using Screen-Printed Carbon Electrode (SPCE) for Dopamine Detection in Neutral Condition [03021-1-03021-5]
21) Latent Heat Storage System Based Mixed Mode Indirect Solar Dryer for Drying Myrobalan [03022-1-03022-5]
22) A Flower-Shaped Quad-Port Dual-Band MIMO Antenna of 29/39 GHz Millimeter-Wave for 5G Applications [03023-1-03023-5]
23) Carbon Dioxide Sensors Based on Carbon Nanotubes with and Without Catalyst [03024-1-03024-4]
24) Electronic Properties of α-Al2O3 [03025-1-03025-4]
25) Charge Density and Density of States (DOS) of Monoclinic ZrO2 Using Meta-GGA DFT Functional [03026-1-03026-4]
26) Synthesis, Characterization and Evaluation of δ-Al2O3 Nanoparticles Prepared by Chemical Method with Variation of pH [03027-1-03027-4]
27) A New High Order Theory for Buckling Temperature Analysis of Functionally Graded Sandwich Plates Resting on Elastic Foundations [03028-1-03028-8]
28) Industrial Internet of Things (IIOT) for Fire Risk Assessment Based on Electronic Sensor [03029-1-03029-5]
29) Dependence of Magnetic Properties of ZnO:Mn Nanocrystals on Synthesis Conditions [03030-1-03030-5]
30) Influence of Mechanical and Geometric Characteristics on Thermal Buckling of Functionally Graded Sandwich Plates [03031-1-03031-6]
31) Diffraction of E-polarized Photons on Periodic Grating of Metal Strips [03032-1-03032-5]
32) Oxidation of the n-GaAs Surface: Morphological and Kinetic Analysis [03033-1-03033-7]
