Analysis of Compact Quadruplet Arrow Slotted Notch Band Antenna with Defected Ground Structure
| Authors | C. Kaur1, K.K. Verma1, T. Islam2 , B.T.P. Madhav3, N.G. Praveena4, S. Das5 , G.S. Rao3 |
| Affiliations |
1Dept. of Physics & Electronics, Dr. Rammanohar Lohia Avadh University, Ayodhya, U.P-224001, India 2Department of Electrical and Computer Engineering, University of Houston, Houston, TX 77204, USA 3Antennas and Liquid Crystals Research Center (ALRC), Department of ECE, Koneru Lakshmaiah Education Foundation, Vaddeswaram, Andhra Pradesh, 522302 India 4Department of ECE, RMK College of Engineering and Technology, Puduvoyal, Chennai-601206, Tamil Nadu, India. 5Department of Electronics and Communication Engineering, IMPS College of Engineering and Technology, Malda-732103, West Bengal, India |
| Е-mail | tislam7@cougarnet.uh.edu |
| Issue | Volume 16, Year 2024, Number 2 |
| Dates | Received 15 December 2023; revised manuscript received 17 April 2024; published online 29 April 2024 |
| Citation | C. Kaur, K.K. Verma, T. Islam, et al., J. Nano- Electron. Phys. 16 No 2, 02029 (2024) |
| DOI | https://doi.org/10.21272/jnep.16(2).02029 |
| PACS Number(s) | 00.11.Al, 00.11.Sa |
| Keywords | Printed Patch, Compact Antenna, Notch Band, Defect Ground Structure, Ultra-wideband, Wireless LAN. |
| Annotation |
In this work, a compact quadruplet arrow slotted elliptical shaped notch band printed microstrip antenna is designed and analyzed for modern wireless communication systems. Initially, a compact elliptical-shaped antenna model with defected ground structure is designed for ultra-wideband (UWB), having a working range of 3.1 to 10.6 GHz. The design was modified with a quadruplet arrow slot which resulted in single-notch band characteristics for wireless LAN bands. The realized peak gain of the recommended antenna is 5.11dBi at a frequency of 3.7 GHz. The analysis of the suggested antenna has been performed by evaluating different geometrical shapes. The surface current distribution analysis is also presented to provide a clear insight on the working principle of the antenna. The various characteristics parameters such as return loss, gain, radiation patterns are presented and discussed. The suggested antenna model occupying a total dimension of 26 24 1.6 mm3 in size is simulated and its results are investigated with CST tool. The designed antenna is prototyped over FR4 substrate for measurement validation. The simulation results of the prescribed antenna are matched with experimental data for validation. The findings indicate that the suggested compact antenna is well-suited for high-speed, close-range communication and can effectively reject signals from the WLAN band. |
|
List of References |
Other articles from this number
1) Effect of Introduction Layers of Native Oxide, InN, and InSb on the Electrical Characterization of the Au/n-InP [02001-1-02001-6]2) Performance Enhancement of the Urdhva-Tiryagbhyam based Vedic Multiplier using FinFET [02002-1-02002-5]
3) Analysis of Buckling Behavior of Functionally Graded Plates Under Mechanical Loading [02003-1-02003-4]
4) Effect of GaSb Compound on Silicon Bandgap Energy [02004-1-02004-4]
5) DFT Modeling of Chemical Reactions Occurring Under the Influence of Positive Ionic Complexes of Aqueous HF Solutions During Electrochemical Etching of Silicon [02005-1-02005-5]
6) A Hepta-band Frequency Tunable Patch Antenna for Cognitive Radio Applications [02006-1-02006-6]
7) Fe2O3/p-InSe Heterostructures Produced by Spray Pyrolysis Method [02007-1-02007-4]
8) Transmission and Absorption of Bilateral Porous Silicon with Macropores or Nanowires [02008-1-02008-7]
9) Dual-Band MIMO Circular Patch Microstrip Antenna (CPMA) with Low Mutual Coupling for 5G Communication System [02009-1-02009-5]
10) A New GAA FinFET without n-well or p-well [02010-1-02010-5]
11) Enhancement in the Sensing Efficacy of ZnO-based Ethanol Sensor: Fe-ZnO Film [02011-1-02011-7]
12) Establishment of the Prospective CZTGS Photovoltaic through the Optimization of Some Device Parameters [02012-1-02012-4]
13) Formation of Nitrogen Supersaturated (Nitrogen-Rich) MeN Nitrides at Thermobaric Sintering of PcBN Composites of cBN-{TiN, ZrN, HfN, VN, NbN}–Al Systems [02013-1-02013-7]
14) Electrodynamic Properties of Resonator Probes for Local Microwave Diagnostics of Nanoelectronic Objects [02014-1-02014-6]
15) Design of a High Efficiency Monopole Antenna Array for GPR Application [02015-1-02015-5]
16) Bandwidth Enhanced and Gain Improvement of Compact Patch Antenna Using Metamaterials for UWB applications [02016-1-02016-6]
17) Field Enhancement with Waveguide Resonance by the Structure Dielectric Grating/Dielectric Layer/Metal Substrate [02017-1-02017-5]
18) Improving the Performance of CZTS/CZTSSe Tandem Thin Film Solar Cell [02018-1-02018-6]
19) Ionizing Radiation Detection Using the Field Effect Transistor Based on Reduced Graphene Oxide [02019-1-02019-4]
20) Effect of Additive (MnO) on Dielectric Constant and Dielectric Loss of Na2O-B2O3 Glasses [02020-1-02020-4]
21) Modeling of X-Ray Phase Contrast Imaging of Optically Heterogeneous Objects [02021-1-02021-6]
22) Optimizing Terahertz Signal Detection in High Electron Mobility Transistors: Insights from Plasma Resonance Studies [02022-1-02022-6]
23) Equivalent Circuit Model to Reach Complicated Surface Photovoltage Transient Shapes in ZnO Thin Films [02023-1-02023-6]
24) Li-ion Diffusion in Porous Carbon Electrode Materials by GITT Method [02024-1-02024-4]
25) Improvement by Heat Treatment of the Mechanical Properties of a Grooving Cutter [02025-1-02025-5]
26) Structure and Properties of Wear-Resistant Nanostructured Coatings Based on W, Cr and N [02026-1-02026-6]
27) Synthesis of Surface Nanostructures of Silver Sulfide in Argon at Atmospheric Pressure in a Gas Discharge [02027-1-02027-6]
28) Modeling and Simulation of Photovoltaic Panel Using Simulink and Proteus Simulation [02028-1-02028-8]
29) Properties of the Original Electron-Irradiated LEDs Homojunction GaP, GaAsP and Heterojunction InGaN Structures [02030-1-02030-6]
30) Design of a Split Ring Resonators-Based Band Pass Filter with Triple Pass Band Characteristics for Wireless Communication Systems [02031-1-02031-5]
