An Evolutionary Anisotropic Behavior for DC04 Sheet Using Hill48 Function under Non-Associated Flow Rule Hypothesis
| Authors | B. Regaiguia1, 2 , O. Chahaoui2, A. Saoudi2, S. Boulahrouz2, M.L. Fares1 |
| Affiliations |
1Department of Metallurgy, Faculty of Technology, Badji-Mokhtar University of Annaba, P.O Box 12, 23000, Algeria 2Laboratory of Advanced Materials Science and Engineering, Abbes Laghrour University Khenchela, 40000, Algeria |
| Е-mail | |
| Issue | Volume 14, Year 2022, Number 5 |
| Dates | Received 23 August 2022; revised manuscript received 20 October 2022; published online 28 October 2022 |
| Citation | B. Regaiguia, O. Chahaoui, A. Saoudi, et al., J. Nano- Electron. Phys. 14 No 5, 05009 (2022) |
| DOI | https://doi.org/10.21272/jnep.14(5).05009 |
| PACS Number(s) | 75.30.Gw |
| Keywords | Hill48 function, Anisotropic metal, Non-associated flow rule, Rolling metal sheet, Evolution yield harden-ing. |
| Annotation |
In this paper, the evolution of the anisotropic behavior of a DC04 sheet during work hardening is analyzed based on a quadratic Hill48 function and under the application of two plasticity approaches: associated and non-associated flow rule approaches (AFR and NAFR, respectively). The mechanical properties have been modeled, such as the uniaxial flow stresses σ(θ) and the coefficient of anisotropy r(θ) (or the Lankford parameter). In the identification of anisotropic parameters, the decoupling of the two tensors (strain and stress) under the assumption of non-associated plasticity gives better predictions compared with the experimental. With the purpose of introducing the evolutionary anisotropic path of plastically equivalent characteristics for the uniaxial flow stresses σ(θ), the isotropic hardening of mechanical strain hardening function is presented using the following empirical law based on Voce model. Therefore, the evolution of plastic potential was described by polynomial function based on NAFR approach. |
|
List of References |
Other articles from this number
1) Structural, Morphological and Optical Characterization of Cobalt Diselenide Grown by Direct Vapor Transport (DVT) Method [05001-1-05001-4]2) Microwave Properties of GNP-Polymer Composites with a Segregated Conductive Network [05002-1-05002-5]
3) Combined (Si) and (Ge) FinFET-CMOS Inverter Characterization Based on Driver to Load Transistor Ratio [05003-1-05003-6]
4) Towards Smart Monitoring Systems: Fault Detection and Diagnosis-Based Artificial Intelligence Algorithms in Solar PV Power Plants [05004-1-05004-5]
5) Microdefects and Electrical Properties of β-Ga2O3 and β-Ga2O3:Mg Crystals Grown by Floating Zone Technique [05005-1-05005-5]
6) Multiharmonic Interactions of Longitudinal Waves in Amplification Section of Superheterodyne Free Electron Laser [05006-1-05006-6]
7) Calculation of the Electron Wave Function and Crystal Potential in a Sphalerite Semiconductor at a Given Temperature [05007-1-05007-5]
8) Power and Threshold Voltage Analysis of 14 nm FinFET 12T SRAM Cell for Low Power Applications [05008-1-05008-6]
9) The Effect of Temperature and Base Thickness on Photoelectric Parameters of Amorphous Silicon Solar Cells [05010-1-05010-6]
10) Energy Characteristics of Nearly Spherical Metallic Nanoparticles [05011-1-05011-5]
11) Study of Mono- and Polycrystalline Silicon Solar Cells with Various Shapes for Photovoltaic Devices in 3D Format: Experiment and Simulation [05012-1-05012-8]
12) Super-Hydrophobic F-Doped SnO2 (FTO) Nanoflowers Deposited by Spray Pyrolysis Process for Solar Cell Applications [05013-1-05013-6]
13) Technological Features of Real Contact Systems’ Production for Nanosystem Equipment [05014-1-05014-5]
14) Implementation and Analysis of an L-Shaped Tunnel Field Effect Transistor by Incorporating Gate and Oxide Engineering [05015-1-05015-4]
15) Effect of Phase Contrast and Geometrical Parameters on Bending Behavior of Sandwich Beams with FG Isotropic Face Sheets [05016-1-05016-4]
16) Design and Analysis of a Dual-Band 27/38 GHz Elliptical-Shaped Patch Antenna for 5G Applications [05017-1-05017-5]
17) Evaluation of the Iron State in Humid Zones Using GPR with 1.6 GHz Bowtie Antenna [05018-1-05018-6]
18) Prediction of Electrophysical and Magnetic Properties of Multicomponent (High-Entropy) Film Alloys [05019-1-05019-4]
19) Electrical Conduction and Polarization Properties of InSe[CS(NH2)2[С14Н10]] Clathrate [05020-1-05020-6]
20) Influence of the Surface Diffusion Length on the Roughness of Thin Layers Obtained by Random Deposition [05021-1-05021-5]
21) Theoretical Study of the Effect of Packing on the Temperature of Fiber Optic Cables [05022-1-05022-5]
22) A Study of Photoreactivity of Inorganic Nanocrystals with Significant Organic Colors [05023-1-05023-10]
23) Photoconductivity Kinetics in Bilateral Macroporous Silicon [05024-1-05024-5]
24) Impact of Device Sizing on Electrical Properties of DG-SOI-MOSFET Using Octave Software [05025-1-05025-4]
25) Comparison of Structural and Optical Properties of CdSe Films Grown by CSD and CBD Methods [05026-1-05026-5]
26) Fractal Structure of Nanoporous Carbon Obtained by Hydrothermal Carbonization of Plant Raw Materials [05027-1-05027-4]
27) Probing Co/Si Interface by Raman Spectroscopy [05028-1-05028-4]
28) Heterolayers of Hexagonal α-CdTe [05029-1-05029-5]
29) Theoretical Study of the Spinel Structure of CuCr2O4 in the Tetragonal Phase Using Density Functional Theory [05030-1-05030-7]
