Effect of Heat Treatments on the Mechanical Properties of a Form Tool

Authors Brahim Chermime , Abdelaziz Abboudi , Hamid Djebaili
Affiliations

ISMA: Laboratoire Ingénierie et Structures des Matériaux Avancés, Université de Khenchela, Algérie

Е-mail
Issue Volume 10, Year 2018, Number 3
Dates Received 04 April 2018; published online 25 June 2018
Citation Brahim Chermime, Abdelaziz Abboudi, Hamid Djebaili, J. Nano- Electron. Phys. 10 No 3, 03032 (2018)
DOI https://doi.org/10.21272/jnep.10(3).03032
PACS Number(s) 71.15.Mb, 71.20.Nr, 71.35. ±
Keywords Fluoroperovskite, GGA approach, Quasiparticles, Exciton energy, Absorption spectrum.
Annotation

During the follow-up of the cutting tools in the production workshops, we noticed that the cutting tools operate in severe conditions, for this we thought to improve their mechanical characteristics and increase their yield. Two key factors influencing these tools, namely geometry and heat treatment. In this study we chose the heat treatment, from a basic fast steel form tool, after making the milling cutter in the tool shop we proceeded to a revenue treatment to remove austenite residues. The purpose of our work is to increase the machining quota of a Z80WCV 18-04-01 high speed steel mill, for this reason our study is based on the reduction of residual austenite by incomes. cumulated after prior quenching for different austenitization temperatures (1240, 1260 and 1270 °C).

List of References