Properties of Amorphous Silica Synthesized from Copper-Smelting Slags
| Authors | M.Sh. Kurbanov1, S.A. Tulaganov1, M. Ernazarov1, L.S. Andriyko2,3, A.I. Marinin3, A.Yu. Shevchenko3 |
| Affiliations |
1Institute of Ion-Plasma and Laser Technologies named after U.A. Arifov, 33, Durmon Yuli St., 100125 Tashkent, Uzbekistan 2Chuiko Institute of Surface Chemistry, 17, General Naumov St., 03164 Kyiv, Ukraine 3National University of Food Technology, 68, Volodymyrska St., 01033 Kyiv, Ukraine |
| Е-mail | |
| Issue | Volume 13, Year 2021, Number 6 |
| Dates | Received 11 November 2021; revised manuscript received 04 December 2021; published online 20 December 2021 |
| Citation | M.Sh. Kurbanov, S.A. Tulaganov, M. Ernazarov, et al., J. Nano- Electron. Phys. 13 No 6, 06024 (2021) |
| DOI | https://doi.org/10.21272/jnep.13(6).06024 |
| PACS Number(s) | 61.46. + w |
| Keywords | Synthesis (27) , Ammonium fluoride, Industrial waste, Highly dispersed powders, Amorphous silicon dioxide, Particle size distribution. |
| Annotation |
Highly dispersed powders of amorphous silica (silicon dioxide) with a purity of 99.98 % using ammonium fluoride were synthesized from the man-made waste of copper-smelting production. The amorphous state of the obtained silica samples was confirmed by XRD analysis. It was found that the particle size distribution of SiO2 in an aqueous medium is mainly represented by aggregates (100-220 nm) and agglomerates of aggregates (1300 and 5500 nm). It is shown that an increase in the time of ultrasonic treatment does not significantly affect the bi- or trimodal character of the particle size distribution. The effective diameter Def of agglomerates of silica particles decreases by 3 times during the first 10 min of ultrasonic treatment. With a subsequent increase in the processing time, Def does not change significantly, but fluctuates around some specific value. IR spectra of silica samples have characteristic bands related to bending vibrations of Si–O–Si at 468 cm – 1 (intense) and O–Si–O at 800 cm – 1 (average intensity), as well as bands related to stretching vibrations of Si–O–Si in the range 1000-1200 cm – 1, which are responsible for the reactivity. It was found that the process of thermal desorption from the surface of the SiO2 sample proceeds in several stages, with the most intense release of the following main volatile products: O (m/z 16), OH (m/z 17), H2O (m/z 18), and CO (m/z 28). The textural characteristics of the synthesized powders were determined by the method of low-temperature nitrogen adsorption. It is shown that the shape of the adsorption isotherm and the hysteresis loop corresponds to the texture porosity of aggregates of non-porous nanomaterials. The adsorption isotherm is well linearized, which made it possible to calculate the specific surface area according to BET (64 m2/g) and Langmuir (93 m2/g), the total pore volume, micropores, and the total area of micropores. |
|
List of References |
Other articles from this number
1) Deep Impact of the n-c-Si Defect Density on Heterojunction with Intrinsic Thin Layer Solar Cells [06001-1-06001-4]2) Comparative Study of the Influence of c-Si:H, a-Si:H, pm-Si:H and c-SiOx as a Passivation Layer on the Performance of HIT n-c-Si Solar Cells [06002-1-06002-4]
3) Enhanced Humidity Sensing Properties of Surfactant-Free Hydrothermally Synthesized Tin Oxide Nanoparticles [06003-1-06003-5]
4) Modeling and Simulation of MOSFET (High-k Dielectric) Using Genetic Algorithms [06004-1-06004-5]
5) Design and Analysis of a High-Performance Capsule-Shaped 2D-Photonic Crystal Biosensor: Application in Biomedicine [06005-1-06005-6]
6) Comparative Study of Thermal and Optical Properties of PANI Based Binary Nanocomposites [06006-1-06006-4]
7) Comparative Analysis of the Electrical Properties of Nanocrystalline NiMoO4 Hydrate and α-NiMoO4 Obtained by Hydrothermal Method [06007-1-06007-6]
8) Hydrogen Treatment of SPR Film Sensors: Experiments and Theoretical Modeling [06008-1-06008-5]
9) The Ag Influence on the Surface States of TiO2, Optical Activity and Its Cytotoxicity [06009-1-06009-5]
10) Distribution of Excess Charge Carriers in Bilateral Macroporous Silicon with Different Thicknesses of Porous Layers [06010-1-06010-5]
11) Si- and Ge-FinFET Inverter Circuits Optimization Based on Driver to Load Transistor Fin Ratio [06011-1-06011-4]
12) On the Time Resolved Optogalvanic Spectroscopy of Neon in a Hollow Cathode Discharge [06012-1-06012-6]
13) Effect of the Content of Molybdenum Disilicide on the Microstructure and Phase Transformations of ZrB2-MoSi2-10Al Coatings upon Annealing in Air [06013-1-06013-4]
14) Optical Properties of ZnO Thin Film: A Simulation Study for Optoelectronic Applications [06014-1-06014-4]
15) Features of Photoelectric Processes in CdS/CdTe Thin Film Heterosystems with Nanoscale Layers in Back Contacts [06015-1-06015-6]
16) A Comparative Study on the Optoelectronic Performance of Undoped, Mg-doped and F/Mg Co-doped ZnO Nanocrystalline Thin Films [06016-1-06016-6]
17) Comparative Study and Characterization of Reduced Graphene Oxide (RGO) and Porous Reduced Graphene Oxide (P-RGO) Based on Coconut Shell Waste [06017-1-06017-6]
18) Effect of Reinforcing Particle Shape on the Behavior of Composites Materials [06018-1-06018-4]
19) Superparamagnetism in Si1 – xGex (B, Hf) Whiskers [06019-1-06019-5]
20) Topological Analysis of the Effect of Annealing on the Grain-Boundary Structure of Polysilicon Films [06020-1-06020-4]
21) Electrochemical Properties of Hybrid Supercapacitors Formed Based on Nanoporous Carbon and Nickel Tungstate [06021-1-06021-5]
22) Experimental Data on Dynamic Changes of Radio Pulses When They are Emitted by Piezoceramic Electromechanical Transducers [06022-1-06022-5]
23) Iron-Doped Titania: Synthesis, Structural, Magnetic and Photocatalytic Properties [06023-1-06023-7]
24) Strengthening Mechanisms in the Surface Layer of Duralumin Modified by a High Current Pulsed Relativistic Electron Beam [06025-1-06025-6]
25) Analysis of Mechanisms to Increase the Industrial Silicon Solar Cell Efficiency [06026-1-06026-8]
26) Numerical Analysis of the Nanoparticle Dynamics in a Viscous Liquid: Deterministic Approach [06027-1-06027-5]
27) Energy and Frequency Properties of Planar n+-n-n+ Diodes with Active Side Boundary [06028-1-06028-4]
28) Methods for Calculating the Transfer Functions of Broadband Plate Piezoelectric Transducers with Transition Layers [06029-1-06029-6]
29) Evaluation of Device Fabrication from FET to CFET: A Review [06030-1-06030-8]
30) Analysis of Crosstalk Noise Using Graphene Nanoribbon Interconnects by Changing Wire Spacing and Electron Mean Free Path [06031-1-06031-4]
31) Investigation of the Structural, Electrical and Corrosion Properties of NbN Films Deposited by Magnetron Sputtering (DC Power Supply) Technique at Different Power [06032-1-06032-6]
32) Optical Properties of CuSCN/Stilbazolium Dye Hybrid Thin Films [06033-1-06033-4]
33) Performance Analysis of Gate All Around (GAA) MOSFET at Cryogenic Temperature for the Sub-Nanometer Regime [06034-1-06034-4]
34) Study and Design of Printed Rectangular Microstrip Antenna Arrays at an Operating Frequency of 27.5 GHz for 5G Applications [06035-1-06035-5]
35) Influence of the Angle of Incident Light on the Performance of Textured Silicon Solar Cells [06036-1-06036-5]
