Metal Defectoscopy by the Capacitive Acoustic Method: The Physical Base Development
| Authors | B.M. Gorkunov1, I.V. Tupa1, L.V. Zaitseva1,2, G.S. Khrypunov1 , R.V. Zaitsev1 , A.L. Khrypunova1 |
| Affiliations | 1 National technical University «Kharkov Polytechnic Institute», 21, Frunze Str., 61002 Kharkiv, Ukraine 2 OJSC «Turboatom», 199, Moskovsky Ave., 61037 Kharkiv, Ukraine |
| Е-mail | |
| Issue | Volume 7, Year 2015, Number 1 |
| Dates | Received 16 July 2014; published online 25 March 2015 |
| Citation | B.M. Gorkunov, I.V. Tupa, L.V. Zaitseva, et al., J. Nano- Electron. Phys. 7 No 1, 01038 (2015) |
| DOI | |
| PACS Number(s) | 06.20. – f, 43.35.Yb |
| Keywords | Transformer, Acoustic control, Long-wave radiation, Wave (30) . |
| Annotation | A physical model with a capacitor for excitation of long-wave longitudinal and surface acoustic waves in metals has been developed. It is shown that the model allows the calculation of the output signal and choice of methods and means for receiving data from acoustic oscillations during the defectoscopy of metals. The possibility of long-wave excitation and reception of acoustic oscillations of capacitive transducers are defined. Solution of the electronic device for implementing the original capacitive acoustic defectoscopy method s designed. |
|
List of References English version of article |
Other articles from this number
1) Effect of Electron Beam Irradiation on Structural, Electrical and Thermo-electric Power of La0.8Sr0.2MnO3 [01001-1-01001-5]2) Projected Range, Straggling and Sputtering Yield of the Ion-Impingement of Inert Gases in Group IV, InP and GaAs Semiconductors [01002-1-01002-6]
3) Modeling of Etching Nano-surfaces of Indium Phosphide [01003-1-01003-3]
4) Analysis of Voltage Transfer Characteristics of Nano-scale SOI CMOS Inverter with Variable Channel Length and Doping Concentration [01004-1-01004-4]
5) Structural and Mechanical Properties of Fluorinated SWCNTs: a DFT Study [01005-1-01005-4]
6) Confined Energy State Based Hypothetical Observations about Device Parameters of AlGaN / GaN HEMT [01006-1-01006-3]
7) Linewidth of Cyclotron Absorption in Band-Gap Graphene: Relaxation Time Approximation vs. Monte Carlo Method [01007-1-01007-5]
8) Deposition of Cadmium Sulphide Thin Films by Photochemical Deposition and Characterization [01008-1-01008-3]
9) Silicon Photodetectors Matrix Coordinate Bipolar Functionally Integrated Structures [01009-1-01009-3]
10) Two Approaches in Computer Simulation of the MFM-images [01010-1-01010-2]
11) Investigation of the Irradiation Influence with High-energy Electronson the Electrical Parameters of the IGBT-transistors [01011-1-01011-3]
12) Charge States of Bare Silicon Clusters up to Si8 by Non-Conventional Tight-Binding Method [01012-1-01012-7]
13) Film Growth Based on an Organic Basis for Photovoltaic p-Cells [01013-1-01013-4]
14) Tin Sulfide Films Obtained by Sulfurization of Electrodeposited Tin Precursors [01014-1-01014-8]
15) Negative Photodielectric Effect in Structures Fullerene Film / Film of Ferroelectric Liquid Crystal [01015-1-01015-4]
16) Effect of Nanosized Tin Oxide Layer on the Efficiency of Photovoltaic Processes in Film Solar Cells Based on Cadmium Telluride [01016-1-01016-5]
17) Theoretical Study of Energy Characteristics of Artificial Receptor on Melamine in Pre-Polymerization Phase [01017-1-01017-5]
18) Nanocomposites Based on Polybutylene Terephthalate Synthesized from Cyclic Oligomers of Butylene Terephthalate and Multiwalled Carbon Nanotubes [01018-1-01018-5]
19) Electrochemical Properties of Hybrid Supercapacitors Formed from Nanosized Spinel LiMn1.5Fe0.5O4 [01019-1-01019-4]
20) Spin Waves in a Ferromagnetic Film with a Periodic System of Antidots [01020-1-01020-4]
21) Use of the Porous A3B5 Compounds for Supercapacitor Electrodes [01021-1-01021-4]
22) Composite Films Based on Hydroxyapatite and Polyvinyl Alcohol [01022-1-01022-4]
23) Synthesis and Study of the Properties of Nanoferrites Obtained by the Sol-gel Method with Participation of Auto-combustion [01023-1-01023-7]
24) Morphology of Islet Systems Formed During Melting of Continuous Bi Films on Ge and SiO2 Substrates [01024-1-01024-3]
25) Gold Surface Reconstruction Diagnostics by the Multiangular Ellipsometry Methods [01025-1-01025-6]
26) Regularities of Structure Formation of Coatings CrN, Obtained by Vacuum Arc Evaporation in a Nitrogen Atmosphere [01026-1-01026-3]
27) Room Temperature Ferromagnetism in InTe Layered Semiconductor Crystals Intercalated by Cobalt [01027-1-01027-4]
28) Effect of Hydrothermal Treatment on Phase Composition of Titanium Dioxide Obtained by Ti(OC4H9)4 Hydrolysis [01028-1-01028-5]
29) Features of Stress State of Germanium Nanocrystals in SiOx Matrix [01029-1-01029-4]
30) FLUX – Software to Calculate the Synchrotron Radiation Characteristics [01030-1-01030-6]
31) Influence of the Filler’s Size on the Percolation Behavior in the Polyethylene Glycol/Carbon Nanotubes System [01031-1-01031-6]
32) Gold Nanocrystals Growth in the Mixture of Primary Alcohols [01032-1-01032-10]
33) The Effect of Laser Annealing on the Surface Morphology and Optical Characteristics of Nanosilicon Films [01033-1-01033-4]
34) Structural Engineering of Multilayer TiN / CrN System Obtained by the Vacuum Arc Evaporation [01034-1-01034-5]
35) Oxidation of Zirconium after Argon Ion Irradiation [01035-1-01035-4]
36) The Features of Decay Kinetics of Photovoltage in Silicon Crystals Used in Solar Energy Caused by Weak Stationary Magnetic Field [01036-1-01036-3]
37) Virial Coefficients for Thermodynamic Systems with Hill Pseudopotential [01037-1-01037-6]
38) The External Periodic Influence Effect on the Kinetics of Metals Fragmentationduring the Severe Plastic Deformation [01039-1-01039-11]
39) The Influence of the Ion Implantation of Au– to the Microstructure of the Amorphous-nanocrystaline AlN-TiB2-TiSi2 [01040-1-01040-5]
40) Tribotechnical Characteristics of Multielement Coatings Based on Nitrides of Ti, Zr, Cr, Nb, Si, Obtained by Means of Vacuum-arc Deposition Method [01041-1-01041-4]
