Hydrochemical Synthesis of HgS1 – xSex Film Solid Solutions

Автор(ы) M.A. Sozanskyi, P.Yo. Shapoval, V.E. Stadnik, O.P. Kyrulo, M.M. Laruk
Принадлежность

Lviv Polytechnic National University, 12, S. Bandera St., 79013 Lviv, Ukraine

Е-mail martyn.a.sozanskyi@lpnu.ua
Выпуск Том 13, Год 2021, Номер 5
Даты Received 06 July 2021; revised manuscript received 20 October 2021; published online 25 October 2021
Ссылка M.A. Sozanskyi, P.Yo. Shapoval, V.E. Stadnik, et al., J. Nano- Electron. Phys. 13 No 5, 05032 (2021)
DOI https://doi.org/10.21272/jnep.13(5).05032
PACS Number(s) 81.15.Lm, 61.05.cp, 78.66.Hf, 68.55.ag
Ключевые слова Mercury sulfide, Mercury selenide, Films (85) , Solid Solution (6) , Chemical deposition (3) , Optical properties (22) .
Аннотация

Solid solution films of mercury sulfide-selenide (HgS1 – xSex) were synthesized on glass substrates by the hydrochemical deposition method. Aqueous solutions of mercury (II) nitrate, thiourea, sodium selenosulfate and trisodium citrate were used. Theoretical calculations of the boundary conditions for the formation of mercury sulfide, mercury selenide and mercury oxide were made in the mercury-thiourea-citrate system. According to the performed X-ray and elemental analysis, the obtained film samples are single phase and consist of HgS1 – xSex substitutional solid solutions. The effect of sodium selenosulfate concentration on the S-Se degree of substitution of HgS1 – xSex coatings was investigated. It was established that the x parameter changes from 0.068 to 0.334 with increasing Na2SeSO3 content from 1·10 – 5 to 1·10 – 4 M. At the same time, the HgS1 – xSex structure modification changes from cinnabar to sphalerite. Higher concentrations of sodium selenosulfate give too high formation rate of the final product and, accordingly, it is difficult to obtain coatings. The morphological and optical properties of HgS1 – xSex films were examined. Their surface is solid, smooth and has a small amount of surface defects. The optical transmission of HgS1 – xSex films increases in the investigated wavelength range from 340 to 900 nm. The transmission curve has a jump in the 400 nm region, which shifts to the longer wavelength region with increasing selenium content in HgS1 – xSex, accordingly, the optical band gap of the films decreases from 2.7 to 2.43 eV.

Список литературы