Polyethylene Oxide/Barium Titanate Composites: Optical, Electrical and Thermal Properties

Автор(ы) Y. Al-Ramadin1, Z.M. Elimat2
Принадлежность

1Department of Physics, University of Jordan, Amman 11942, Jordan

2Department of Physics and Basic Sciences, Faculty of Engineering Technology, Al-Balqa Applied University, Al-Salt, Jordan

Е-mail zaid_elimat@bau.edu.jo
Выпуск Том 12, Год 2020, Номер 5
Даты Received 01 June 2020; revised manuscript received 15 October 2020; published online 25 October 2020
Ссылка Y. Al-Ramadin, Z.M. Elimat, J. Nano- Electron. Phys. 12 No 5, 05014 (2020)
DOI https://doi.org/10.21272/jnep.12(5).05014
PACS Number(s) 78.66.Sq, 73.61. – r, 65.60. + a, 72.80.Tm
Ключевые слова Polyethylene oxide (PEO), Barium titanate (2) , Optical (68) , Electrical (45) , Thermal (53) , Conductivity (43) .
Аннотация

Our goal is to prepare and study the physical properties (optical, electrical, and thermal) of barium titanate (BaTiO3)/polyethylene oxide (PEO) as ceramic polymer composites (CPCs). CPCs consist of BaTiO3 (0, 2, 4, 7, 10, and 12 by weight percentage concentration) as ferroelectric ceramic fillers and PEO as a host polymer matrix. The composites have been prepared by casting method and their physical properties are investigated and discussed. The optical properties and parameters, such as the optical absorption, optical energy gap, dielectric constant, and refractive index are determined as a function of BaTiO3 concentration and applied UV-wavelength ranges from 300 to 800 nm. The alternating electrical properties have been calculated and studied as a function of BaTiO3 concentrations; applied frequency varies from 50 Hz to 1000 Hz, and temperature is in the range 30-55 C. Also, the thermal conductivity of the PEO/BaTiO3 CPCs has been calculated as a function of both BaTiO3 concentration and temperature. With the increase in BaTiO3 ceramic content, the optical energy gap is found to decrease from 2.85 eV for 0 wt. % BaTiO3 to 2.26 eV for 12 wt. % BaTiO3. We found that these physical properties depend on the BaTiO3 ceramic content and temperature. This indicates the possibility of manipulation of the physical parameter values by control of the BaTiO3 weight ratio in polymer composites.

Список литературы