Studies on DC Magnetron Sputtered AZO Thin Films for HIT Solar Cell Application

Автор(ы) Ranjitha R, T.K. Subramanyam, S. Pavan kumar, Nagesh M
Принадлежность

Interdisciplinary Research Centre, R.V. College of Engineering, 560059 Bengaluru, India

Е-mail ranjitha0792@gmail.com
Выпуск Том 12, Год 2020, Номер 2
Даты Received 17 February 2020; revised manuscript received 11 April 2020; published online 25 April 2020
Ссылка Ranjitha R., T.K. Subramanyam, S. Pavan kumar, Nagesh M., J. Nano- Electron. Phys. 12 No 2, 02037 (2020)
DOI https://doi.org/10.21272/jnep.12(2).02037
PACS Number(s) 84.60.Jt, 84.40.Fe
Ключевые слова AZO thin films, DC sputtering, HIT cells.
Аннотация

Aluminum doped zinc oxide (AZO) is becoming an important and alternative transparent conducting oxide (TCO) material for solar photovoltaic applications due to its good electrical and optical characteristics, lower cost and more abundance, non-toxicity and stability in hydrogen plasma when compared to the popular indium tin oxide (ITO). In this work, AZO films are deposited on glass and silicon substrates with direct current (DC) magnetron sputtering using 5N pure Zinc Oxide target doped with 2 wt% Al2O3.The effect of deposition conditions on the structural, electrical and optical properties of the AZO films are investigated. The results demonstrated that the measured thickness of the deposited films are in the range 135-490 nm. The X-ray diffraction studies reveal that the AZO films exhibit hexagaonal-wurtzite structure with the preferred orientation of grains along the (002) planes and an average crystal size of ~42 nm. At optimized sputter deposition parameters of an electrode distance of ~ 60 mm, substrate temperature of ~ 200 °C, target DC power of ~150 W and working pressure of ~2∙10  3 mbar; the AZO films have shown an electrical resistivity of 1.27∙10  3 ∙cm and an average optical transmittance value of 83.76% in the visible range for an optimal film thickness of ~265 nm. Finally HIT Solar Cells with AZO/p-a-Si:H/i-Si:H/n-c-Si/n-a-Si:H/Al structure have been fabricated by applying the optimized AZO films as front transparent electrodes. It is observed from the preliminary experiments that the fabricated cells have shown an initial photo conversion efficiency of 10.18% with an open circuit voltage (Voc) of 890 mV, short circuit current density (Jsc) of 15.68 mA/cm2 and a fill factor (FF) of ~ 73%.

Список литературы