Effect of Metal on Characteristics of MPc Organic Diodes

Authors M. Benhaliliba1 , Y.S. Ocak2 , C.E. Benouis1
Affiliations

1 Physics Department, Science Faculty, Oran University of Sciences and Technology USTO-MB, BP1505 Oran, Algeria

2 Department of Science, Faculty of Education, University of Dicle, Diyarbakir, Turkey

Е-mail mbenhaliliba@gmail.com
Issue Volume 6, Year 2014, Number 4
Dates Received 11 August 2014; revised manuscript received 27 November 2014; published online 29 November 2014
Citation M. Benhaliliba, Y.S. Ocak, C.E. Benouis, J. Nano- Electron. Phys. 6 No 4, 04009 (2014)
DOI
PACS Number(s) 85.30.Hi, 85.30.Kk
Keywords Organic layers, Spin coating (5) , Current-voltage characteristics (3) , Ideality factor (10) , Barrier height (11) .
Annotation The fabrication and electrical characterization of metal phthalocyanine MPc organic diodes have been investigated. The Au / MPc / Si Schottky diodes are fabricated via a spin coating route. Based on the electrical measurement of the current versus bias voltage in dark conditions we extract the parameters such as ideality factor, saturation current, series resistance and rectifying factor. Role of metal M = Cu, Al, Zn, Mg on the electronic parameters is emphasized. The obtained values of n, 1.85, 2.22 and 4.40, show a non-ideal behavior. Using a derivate dV / dlnI and H(I) functions, we determine the ideality factor and series resistance and found to be 2 and 17 Ω for the CuPc device.

List of References